Skip to content
Castle Green Lock & Key SpecialistsRequest a visit
Open 24/7(289) 813-6380Call now
Hands holding a lock cylinder and a ring of keys above a worn workbench with another cylinder and loose keys. — Lock Rekeying, Kent Gardens

Change or rekey · Kent Gardens

Lock Rekeying in Kent Gardens

The builder handed over your new home with a stack of identical keys, and you know the framing crew, the painters and the flooring installers all used a construction key during the build. The doors are brand new, but the key that opens them should be yours alone.

Call now · open 24/7(289) 813-6380

Request a visit

In plain words

Moving into a home is the moment most people first hear about rekeying, and it is the most sensible time to do it. A resale house has usually passed through owners, real estate agents, home inspectors, cleaners and trades, each of whom may have held a key at some point. Rekeying every exterior cylinder on move-in day means the only keys that work are the ones cut for you, and the same visit is a chance to put every door on one key so the coffee tin of mystery keys can go in the recycling.

Sound familiar?

The whole key ring went missing somewhere between the grocery store and the bus. You got back in with the spare, but a set of keys is out there, and you would sleep better knowing they open nothing.

How the visit goes

Lock Rekeying · Kent Gardens

How the visit goes

Hands using a yellow-handled screwdriver at a steel deadbolt plate on a dark door, with a steel knob below. — Kent Gardens
  1. 1

    Who is entitled to change the locks

    Rekeying decides who can enter a home, so the first check is about the person asking. A homeowner shows photo identification and something tying them to the property, such as a tax bill, a closing document or a utility statement. A property manager brings authorization from the owner. A tenant is asked whether the landlord has agreed to the change and will receive a copy of the new key, because tenancy rules here expect both sides to hold one. Where a unit is in a condominium, the locksmith asks whether the building has a rule about suite-door locks. None of this is an obstacle; it is the part of the job that protects the home being worked on.

  2. 2

    Sliding the plug and changing the pins

    With the cylinder in hand, the locksmith removes the cam or tailpiece from the back, inserts the existing key and turns the plug slightly so the top pins clear, then pushes a plug follower in behind the plug as it slides out. The follower holds the top pins and springs in the housing so nothing springs loose. The plug now sits on the bench with its row of bottom pins exposed, and those pins are tipped out. This is the heart of rekeying a pin-tumbler cylinder: the pins that decided which key worked are gone, and the plug is ready to receive a set that matches a key nobody has ever carried.

  3. 3

    Looking after a freshly pinned cylinder

    A cylinder that has just been rekeyed turns as smoothly as it ever will, and a little care keeps it that way. Once or twice a year, a puff of whatever lubricant the cylinder maker specifies into the keyway and a few turns of the key is all it needs, since some current cylinders use oil while too much graphite can itself gum a cylinder. When you need more copies, cut them from one of the locksmith's originals rather than from a copy, because each generation drifts a little from the true depths. A key that starts to need a jiggle is the cylinder asking for a clean and a new key, not a sign of anything serious.

In the van

  • Retaining clip tool
  • Pinning tweezers and tray
  • Replacement cylinder for odd keyways
  • Key gauge
  • Plug follower

What affects the quote

  1. 1

    Smart lock override cylinders and codes

    Pinning the backup cylinder of a keypad or app lock to the house key is a small extra task, and reviewing or deleting user codes at the same time is another, each named in the quote.

  2. 2

    No working key for a door

    When a cylinder must be shimmed, decoded or picked open before it can be repinned because no key exists for it, that extra step is included in the quote for that door.

  3. 3

    Upgrades chosen during the visit

    Some people take the opportunity to replace a double-cylinder deadbolt with a thumb-turn model, add a reinforced strike or move to a heavier deadbolt. None of it is needed to rekey; each is a separate line.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 813-6380

Lock Rekeying: questions

Advice · (289) 813-6380

Can the entry door of my condo suite be rekeyed?

Often, but check with your property management first. Condominium corporations have a right to enter a unit on reasonable notice, and without notice in an emergency, and many buildings ask that suite doors stay on a system the corporation can open or that a key be lodged with management. Lobby, garage and locker-room doors belong to the corporation and are theirs to manage. A locksmith will ask about your building's rule and work within it.

My locks are different brands. Is that a problem?

Not a problem, just a detail to plan around. What matters is the keyway, meaning the profile of the slot the key fits, rather than the name on the lock. Different makers sometimes share a profile and sometimes do not. Where two cylinders cannot accept the same key, one is exchanged for a compatible cylinder in the same finish and pinned to match. From the outside the door looks the same and from your pocket it is one key.

My house is older and has a mortise lock. Can that be rekeyed?

Yes. A mortise lock, the kind with a large case set into the edge of the door, uses a threaded cylinder held by a set screw reached from the door's edge. The cylinder unthreads, is pinned like any other and screws back in. Where a very old lock uses a bit key or a lever mechanism instead of a pin cylinder, the locksmith will explain the options, which may include fitting a modern cylinder into the existing case so the door keeps its original hardware.

Halton, Ontario

Kent Gardens information

Town
Kent Gardens, Halton, Ontario
In business
20 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

27%

Newer homes. About 27% of homes in Oakville were built in 1980 or earlier, according to the 2021 Census.

Builders often key an entire street to a small number of keyways, which is convenient for them and less so for owners afterwards. In newer areas a locksmith can move a household onto a keyway that is genuinely its own.

59%

A mix of homes. Single-detached houses make up about 59% of homes in Oakville (2021 Census).

Mixed housing brings mixed hardware ages as well as types. A locksmith may rebuild a mortise lock on a semi-detached house and then set up a keypad on a townhouse door across the road, and treats each with the care its owner expects.

Source: Statistics Canada, 2021 Census of Population

Open Kent Gardens in Google Maps

Open 24/7

Request a visit

The builder handed over your new home with a stack of identical keys, and you know the framing crew, the painters and the flooring installers all used a construction key during the build.

Call now · open 24/7(289) 813-6380
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 20 years in business