Skip to content
Castle Green Lock & Key SpecialistsRequest a visit
Open 24/7(289) 813-6380Call now
Hands using a yellow-handled screwdriver at a steel deadbolt plate on a dark door, with a steel knob below. — Holton Heights

Plan ahead High security · Holton Heights

High Security Locks in Holton Heights

The restricted keys you bought years ago are no longer restricted; the locksmith mentioned the patent has run out and blanks are sold openly. Your key control quietly stopped being control.

Call now · open 24/7(289) 813-6380

Request a visit

In plain words

The service begins with a conversation about what the door protects and what worries you, then a close look at the door as a whole: the cylinder, the bolt, the strike, the frame, the hinges and any glass nearby. From that the locksmith recommends a level of protection that matches the risk, fits it, and sets up the key system in your name. From then on, extra keys are cut only when you authorise them, and you receive a record of which key opens which door. It is the mechanical answer to the question most people eventually ask: who else has a key to this?

Sound familiar?

The pharmacy stockroom, the server closet or the cash office is protected by the same ordinary cylinder as the staff washroom. One lost key on a lanyard would open all of them.

How the visit goes

High Security Locks · Holton Heights

How the visit goes

Person in an apron holding a car key fob beside a key-cutting machine, with rows of key blanks on the wall. — Holton Heights
  1. 1

    The bolt, the pocket and the strike

    A deadbolt is only as good as how far it reaches and what it reaches into. The locksmith measures the throw of the bolt with the door closed, checks that it fully extends without the door being lifted or pushed, and looks at the pocket it enters in the jamb. A shallow pocket, a stamped strike plate and screws barely longer than a thumbnail are the usual finding on a builder-grade door. Then the frame is examined for splits, soft wood and gaps behind the jamb, since a kick lands on the strike, not on the cylinder.

  2. 2

    Fitting a heavier deadbolt

    When the existing deadbolt is light or worn, the locksmith fits a graded deadbolt through the same bore where possible. The bolt throws a full inch and carries a hardened steel pin that turns under a saw blade, and the housing keeps part of the bolt supported against a kick. The latch is set in the edge bore with the correct backset, the exterior housing and interior thumb-turn are joined through the door with the long screws, and the final tightening is done by hand so nothing strips. The bolt is then thrown with the door open and closed to confirm it extends completely.

  3. 3

    Looking after a precision cylinder

    High-security cylinders are finer mechanisms than the pin tumblers they replace, and a little care keeps them turning sweetly. Use only the dry lubricant the locksmith recommends, once or twice a year and sparingly, and never household oil, which gathers grit around the finger pins and sidebar. In cold weather, if the key resists, warm it in your hand or use a de-icer rather than forcing it. Insert the key fully before turning. Keep a spare key indoors so a bent or worn key is retired rather than pushed on. Treated this way, the cylinder outlasts the door around it.

In the van

  • Commercial mortise lock body
  • Graded deadbolt with hardened bolt
  • High-security cylinder
  • Wrap-around door reinforcer
  • Key control authorisation card

What affects the quote

  1. 1

    Retiring the old keyway

    If other doors stay on the old key for now, they may need rekeying so an unknown copy has nowhere to go; that is additional cylinder work alongside the upgrade.

  2. 2

    Condition of the door itself

    A solid door that hangs true takes hardware straight away. A dropped, swollen or hollow door may need hinge work, shimming or a recommendation to replace the slab before the lock is worth fitting.

  3. 3

    Hinge and door edge work

    Long hinge screws, a hinge-side security stud or repair to a chewed door edge are small items that add up on a door that has been forced before.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 813-6380

High Security Locks: questions

Advice · (289) 813-6380

What about the glass panel next to my front door?

A sidelight within reach of the inside thumb-turn is the weak point of an otherwise strong door, since a broken pane lets a hand reach the turn. Options include moving the deadbolt further from the glass, a lock function that needs a key inside as well, or a laminated pane. Because everyone must still be able to leave easily, the locksmith talks through the trade-offs and helps you pick the arrangement that suits your household.

Should I upgrade the front door only, or every door?

Start with the doors that matter and the ones that are weakest, which are often not the same. Front doors usually carry the sturdiest hardware already; the side door by the driveway, the door from the garage and the basement walkout often carry the lightest locks and get the least attention. The assessment walks the whole perimeter with you so the upgrade goes where entry is most likely, and the remaining doors can join the same key later.

What is bumping, and does this stop it?

Bumping uses a specially cut key that is struck while under light turning pressure, bouncing the pins to the shear line for an instant so an ordinary cylinder opens. It works on many standard pin tumblers. A high security cylinder needs its sidebar released by separately positioned finger or rotating pins at the same moment, and a bump key cannot set those, so the plug stays locked. It is one of the clearest advantages of the upgrade.

Halton, Ontario

Holton Heights information

Town
Holton Heights, Halton, Ontario
In business
20 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

27%

Newer homes. About 27% of homes in Oakville were built in 1980 or earlier, according to the 2021 Census.

During construction many people hold a key: framers, finishers, painters, the sales office. Where homes are new, rekeying the exterior doors to a fresh key is the tidy way to close that chapter, and it takes a single visit.

59%

A mix of homes. Single-detached houses make up about 59% of homes in Oakville (2021 Census).

In a mixed area, a locksmith's advice bends to the building. For a house, the side door and garage entry get attention. For an apartment, the suite door's closer, strike and viewer do. The principle is the same: look at how the door is actually used.

Source: Statistics Canada, 2021 Census of Population

Open Holton Heights in Google Maps

Open 24/7

Request a visit

The restricted keys you bought years ago are no longer restricted; the locksmith mentioned the patent has run out and blanks are sold openly.

Call now · open 24/7(289) 813-6380
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 20 years in business