Skip to content
Castle Green Lock & Key SpecialistsRequest a visit
Open 24/7(289) 813-6380Call now
Person touching the sliding metal bolt on a wooden garden gate. — Gate & Building Entry Locks, Castle Green

Change or rekey · Castle Green

Gate & Building Entry Locks in Castle Green

Every time the courtyard gate closes, it slams hard enough to rattle the fence panels, and the deadlatch never quite drops into the keeper before the spring yanks it the rest of the way. One good gust of wind and it bounces right back open.

Call now · open 24/7(289) 813-6380

Request a visit

In plain words

A building outlives its tenants, and every move-out that skips a rekey leaves one more key in circulation that nobody living there today can account for. This service treats that turnover as routine business: the shared entry's cylinder is rekeyed to a fresh combination, new keys are cut for everyone who currently needs one, and any gate on the same property that should share that key is brought along to match. What used to be an open question about who can get in becomes a short, current list.

Sound familiar?

The gate to the side yard used to close with a satisfying click. After a winter of frost heaving the fence post, the latch now sits a full inch below where the strike is waiting for it, and the gate swings free no matter how hard it is pulled shut.

How the visit goes

Gate & Building Entry Locks · Castle Green

How the visit goes

Hands using a yellow-handled screwdriver at a steel deadbolt plate on a dark door, with a steel knob below. — Castle Green
  1. 1

    Testing the electronic side of the entry

    Where a buzzer, keypad or electric strike is part of the entry, the check runs through each piece in turn: whether the intercom sends a signal at all, whether the strike receives power when it should, and, where the installed lock actually includes a keyed mechanical override, whether that key still turns smoothly on its own. Treating the electronic and mechanical sides as one system, rather than assuming the fault is wherever it was last blamed, is what keeps a working lock from being replaced when the actual issue was a loose wire or a dead transformer.

  2. 2

    Coordinating keys across a shared entry

    On a property with several gates or a shared building entry, the cylinders that should open on one key are brought onto a common pinning during the same visit, rather than one at a time as complaints come in. Current residents or unit holders each receive a key that matches every door they are meant to use, and a short list is kept of which key opens what. Any gate meant to stay on its own separate key, such as a utility gate the property manager alone uses, is deliberately left off the shared system.

  3. 3

    Everyone currently there has a matching key

    If the visit involved a rekey, every current resident, tenant or key holder leaves with a key cut to the new combination, and a short written note of who received one. Anyone who moved out before the change is now holding a key that no longer fits whichever gate or door was rekeyed, though it may still turn any other cylinder on the property that kept its old combination. Where several gates or doors were brought onto the same key, each one is tested in your hand before the locksmith leaves, so you are not left guessing which key opens which gate the next time you need one after dark.

In the van

  • Voltage tester for electric strikes
  • Dry graphite or PTFE lubricant
  • Corrosion-resistant fasteners
  • Strike plates and keepers
  • Gate locks and latches

What affects the quote

  1. 1

    Whether keys need coordinating across doors

    Rekeying a single lock is one task. Bringing several gates or a shared entry onto one common key, or setting up a master key arrangement across a property, adds planning and cylinder work beyond a single rekey.

  2. 2

    Master key or keyed-alike planning

    Setting up a master key system, or bringing several separate locks onto one shared key, involves planning the pinning structure across every cylinder involved, which is more work than rekeying one lock in isolation.

  3. 3

    Time of year and weather on the day

    A cylinder frozen solid or a closer stiffened by cold takes patient work before adjustment or replacement can even begin, so a call made during a cold snap is quoted with that extra time in mind.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 813-6380

Gate & Building Entry Locks: questions

Advice · (289) 813-6380

What is a good option for a gate that delivery drivers or a maintenance crew need occasional access to?

A keypad or a lockbox with a rotating code works well there, since access can be shared without handing out a physical key that has to come back later. A weather-rated cylinder with a separate access key is another option if the property already runs on a keyed system. The locksmith can talk through how often the code should change and who on site should know it, so the gate stays convenient without staying open to everyone.

How long does a gate or building entry lock visit usually take?

It depends on what the assessment finds once the locksmith is looking at the actual hardware. A single gate lock that only needs adjusting or rekeying is a shorter visit than one where the closer, hinges and post all need attention, or where several gates on a property are being brought onto one key. Electronic hardware such as a buzzer or electric strike adds its own testing time. The locksmith can give a closer sense of the scope once the gate or door has been examined in person.

If the lock gets replaced, can the existing intercom or buzzer stay?

In most cases, yes. The buzzer, keypad and intercom are generally separate from the mechanical lock or cylinder, so replacing the lock itself does not usually mean replacing the electronic side too. Where the two are connected, such as an electric strike wired to the same frame as a new mechanical lock, the locksmith checks the fit and wiring before starting so the electronic system keeps working once the new hardware is in place. Anything that would need to change is explained beforehand.

Gate & Building Entry Locks near you

Halton, Ontario

Castle Green information

Town
Castle Green, Halton, Ontario
In business
20 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

27%

Newer homes. About 27% of homes in Oakville were built in 1980 or earlier, according to the 2021 Census.

In areas of recent construction, doors mostly carry builder-grade locks that were chosen for the whole development at once. They work, but a household that wants more can upgrade the cylinder or the whole set without any surprises about fit.

59%

A mix of homes. Single-detached houses make up about 59% of homes in Oakville (2021 Census).

In areas of mixed housing, landlords may own a house here and a few units there. A locksmith can put all of it under one master system so the owner carries one key while each tenant's key opens only their own door.

Source: Statistics Canada, 2021 Census of Population

Open Castle Green in Google Maps

Open 24/7

Request a visit

Every time the courtyard gate closes, it slams hard enough to rattle the fence panels, and the deadlatch never quite drops into the keeper before the spring yanks it the rest of the way.

Call now · open 24/7(289) 813-6380
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 20 years in business